POMPA
Full AutomaticBooster Sets
High-pressure, quiet-running and compact fully automatic booster sets for clean or very slightly contaminated, low-viscosity liquids; single-, twin- or triple-pump, up to 6 pumps on request.
Two impeller designs, one packaged system
With Noryl-impeller or cast-impeller pumps; a complete package with pumps, control panel, manifolds and valves on a common base frame.
01Full Automatic Booster Sets with Noryl Impellers
High-pressure, quiet-running, compact and low in energy consumption; fully automatic booster sets that can be manufactured with horizontal or vertical pumps.
- Capacity
- up to 90 m³/h
- Head
- up to 160 m
- Discharge flange
- 1 ¼″ – 4″
- Operating temperature
- 0 – 50 °C
- Casing pressure
- 10 – 16 bar
- Pump construction
- Horizontal / vertical
02Full Automatic Booster Sets with Cast Impellers
Full automatic booster sets built with radially split casing, vertical, multistage centrifugal pumps, taking up minimum space thanks to their vertical design.
- Capacity
- up to 300 m³/h
- Head
- up to 180 m
- Discharge flange
- 32 – 65 mm
- Operating temperature
- up to 70 °C
- Casing pressure
- 10 – 16 – 25 bar
- Pump construction
- Vertical
1, 2 or 3 pumps depending on capacity
Depending on the required capacity and head, systems are produced in single-pump, twin-pump or triple-pump versions.
Single-pump
Water level float switch (electric float switch); phase control system (FKS) on units with three-phase motors.
Twin-pump
In booster sets with more than one pump, pump alternation, phase control and liquid level control are standard.
Triple-pump
Triple-pump set manufactured as standard; pump alternation, phase control and liquid level control are standard.
pumps max.
Can be configured as a multi-pump set on request.
Pressure switch or variable frequency drive (VFD) control
Booster set control panel operating in two different modes, automatic and manual; electrical components are selected from reliable, high-quality brands.
Standard booster set panel controlled by a pressure switch.
For comfort applications; variable-speed operation with variable frequency drive (VFD) control.
Two types, in one table
Optional alternatives for materials are given in brackets.
| Feature | 01With Noryl Impellers | 02With Cast Impellers |
|---|---|---|
| Pump construction | With horizontal or vertical pumps | With vertical pumps; radially split casing, multistage |
| Impeller | Noryl | Brass (opt. bronze / AISI 304) |
| Stage casing | Noryl | GG 25 (opt. bronze / AISI 304) |
| Suction flange | 1 ¼″ – 4″ | — |
| Discharge flange | 1 ¼″ – 4″ | 32 – 65 mm |
| Capacity | up to 90 m³/h | up to 300 m³/h |
| Head | up to 160 m | up to 180 m |
| Speed | up to 2900 rpm | up to 2900 rpm |
| Operating temperature | 0 – 50 °C | up to 70 °C |
| Casing pressure | 10 – 16 bar | 10 – 16 – 25 bar |
| Number of pumps | 1 – 2 – 3 · up to 6 pumps | 1 – 2 – 3 · up to 6 pumps |
